Do you know how to connect hydraulic hoses?

Do you know how to connect hydraulic hoses?

When matching hydraulic hose joints with other equipment, ensuring the sealing between hydraulic hoses and hoses is the most critical step. Let's take a brief look:

1. Sealing method for connecting hydraulic hose joints and hoses - the inner and outer threads of the quick connector can only be connected to the hose after using transition joints or adapters.

2. The connection and sealing method of hydraulic hose joints and hoses - no matter there are many kinds of hose joints, it is necessary to choose which transition joints to use according to the types of hose joints. If the hose is an ordinary water pipe, it should use a transition joint, one end of the inner tooth, one end of the water pipe, and then fixed with a throat hoop. If the two ends of the hose are internal teeth, it should be connected with the transition joint, one internal tooth and one external tooth. If the two ends of the hose are external teeth, it should be connected with the transition joint, and the internal teeth will be straight.

3. Sealing method for connecting hydraulic hose joints and hoses—generally, hydraulic quick-change joints must withstand high pressure. Therefore, in most cases, high-pressure oil pipes are used. In most cases, both ends of the oil pipes are used as inner teeth. You can take it directly.

4. Sealing method of hydraulic hose joint and hose connection - As for the hydraulic joint, there is no need for other rubber rings to seal, and the product itself is concave at one end and convex at the other end, and it can be completely sealed after connection.