How to seal the hydraulic hose connection with the hose?

Many people will learn about other equipment after buying a hydraulic hose joint. Many people want to know how the hydraulic hose joint is connected and sealed with the hose?

1. Sealing method for connecting hydraulic hose joints and hoses - the inner and outer threads of the quick connector can only be connected to the hose after using transition joints or adapters.

2. The connection and sealing method of hydraulic hose joints and hoses - no matter there are many kinds of hose joints, it is necessary to choose which transition joints to use according to the types of hose joints. If the hose is an ordinary water pipe, it should use a transition joint, one end of the inner tooth, one end of the water pipe, and then fixed with a throat hoop. If the two ends of the hose are internal teeth, it should be used with the transition joint, one internal tooth and one external tooth. If the two ends of the hose are external teeth, it should be connected with the transition joint, and the internal teeth will be straight.

3. Sealing method for connecting hydraulic hose joints and hoses—generally, hydraulic quick-change joints must withstand high pressure. Therefore, in most cases, high-pressure oil pipes are used. In most cases, both ends of the oil pipes are used as inner teeth. You can take it directly.

4. Sealing method for connecting hydraulic hose joints and hoses - as for hydraulic joints, no other rubber rings are used to seal, and the product itself is concave at one end and convex at the other end, and can be completely sealed after connection.