Requirements for the layout of hydraulic hoses

Author:admin Date:2022-09-29

How to arrange the hydraulic hose reasonably

1. The pipeline should try to avoid high temperature radiation and cooling water spray and other places where the temperature is too high or too low, especially the hose joints.

2. The piping should not affect the operation of the host and other equipment, and should be safe and reliable, convenient for work, observation and maintenance.

3. The piping should be horizontal and vertical, neat and beautiful. Minimize bends or small-angle bends, and use large arcs to reduce oil flow resistance.

4. When the installation conflicts, the small pipe should be replaced by the large pipe and the low pressure pipe should be replaced by the high pressure pipe.

5. Pipes should not be in contact when they cross each other, and should be separated by a certain distance.

6. The joints of parallel pipes should be staggered to avoid affecting the installation and disassembly.

7. In order to facilitate disassembly and cleaning of the pipeline, the union should be properly installed, but it should be used sparingly to reduce the possibility of leakage.

Pre:How to seal the hydraulic hose connection with the hose?
Next:What is the production process of hydraulic hose protective sleeve